The “Windows could not automatically bind the IP protocol stack to the network adapter” is an error that appears on your PC when the network adapter is not working properly. The biggest giveaway is the disturbed internet connection, where the internet stops working out of nowhere.
Another instance of this error is encountered when you try switching between regular and VPN connections.
The IP address of your network plays a crucial role in the smooth functioning of the internet. Therefore, when there is an issue with the VPN servers or while uninstalling VPN when it becomes difficult for your PC to bind the IP back to your network adapter, you face a “Windows couldn’t automatically bind the IP protocol stack to the network adapter” error.
Some other issues that cause the error are –
Fortunately, all these issues can be resolved. Keep reading as we reveal that the ultimate fixes to Windows could not automatically bind the IP.
To fix the issue, identifying the core reason is a must. However, as multiple reasons may cause the error, you have no other option than to try a bunch of fixes one after the other. Check out the fixes below and apply them using the steps given.
Step 1 – Press Win+R to open the Run search.
Step 2 – In the Run search, use the command ncpa.cpl to open the adapter menu.
Step 3 – Select the adapter that you are connected to and right-click on it to find Properties.
Step 4 – In the Properties pop-up, navigate to the Network tab and put an enable mark for the following –
Step 5 – After enabling all of these, click OK to save the changes.
Step 1 – Press Win+R to bring up the Run search.
Step 2 – In the Run search, use the command Services.msc
Step 3 – Find the WLAN AutoConfig service and double-click on it to check its status.
Step 4 – Change the Startup type of the service to Automatic so that it starts running every time you start your PC.
Step 5 – Click the Start button to initiate the WLAN AutoConfig service.
Step 1 – Go to the Start Menu and search for Command Prompt.
Step 2 – Use the Run as administrator option to launch the CMD window.
Step 3 – In the cmd window, use the command – netsh winsock reset.
Step 4 – After you have run the command, use the next command – netsh int ip reset.
Step 5 – The above two commands will reset the Winsock for your PC. Simply restart your PC for the changes to take effect.
Step 6 – After you have restarted the PC, relaunch the CMD window using the admin privileges.
Step 7 – To flush the DNS cache, use the following commands one after the other (press enter after each) –
Step 8 – After you have performed all the steps, you can restart the PC and try checking if the Windows couldn’t automatically bind the IP protocol stack to the network adapter error is resolved or not.
Read Also: Ways to Fix The Requested URL Was Rejected Browser Error
Step 1 – Download the Advanced Driver Updater.
Step 2 – Click the Start Scan Now button to initiate the scan.
Step 3 – The scan searches for outdated drivers on your PC.
Step 4 – Check the results to find the network adapter listed there.
Step 5 – Click on Update all to clear all the outdated drivers.
Step 1 – Press Win+I to open the System Settings.
Step 2 – In System Settings, use the command look for recovery options.
Step 3 – Use the Reset this PC button to initialize the process in the recovery option.
Step 4 – Follow the shown steps on the screen to choose your reset mode and continue resetting the system.
After trying all these fixes, you will be relieved that Windows could not automatically bind the IP protocol stack to the network adapter error is resolved. Also, ensure that you have uninstalled and removed all the components of your VPN client, as that is the primary reason behind the occurrence of this error.
You might not need to apply all the fixes depending on the reason; the fixes work differently for everyone. To resolve the issue all you have to do is try the fixes until your problem is resolved.
With that, we have reached the end of this post. Thanks for reading. Good luck!
Recommended :
PDF documents are considered the finest and easiest way to share content. The format is…
If you’re encountering the frustrating issue of “The Ethernet cable is plugged in but no…
Do you know that PDF documents are one of the most stable formats available today?…
Are you facing the frustrating "PDF Export Failed" error on Windows while trying to save…
Google Chrome and Mozilla Firefox are today's two most prominent and widely used browser options.…
When you launch games such as Fortnite through game clients like Steam or Epic Games,…
View Comments
Fix 2 worked for me, thank you so much.
One must be patient in Win7, as applying the Startup Type- takes a good 1 minute. This is a fix further down the list. Any specific items if Win7 + Intel Adapter AC 7295 Dual Adapter. I sourced with manufacturer sites for hardware’s drivers individually. It guarantees I have what I need. I have done that since 1998…..:)
Dear Melissa O’Harra, There are no specific steps for win 7 AC 7295 dual adapter. You have to change the Startup type to Automatic. As far as the drivers are concerned it is a good thing that you are able to get them from the OEM websites. However, we believe this method consumes time and effort. Might we suggest using Advanced Driver Updater that can update your drivers with a few mouse clicks.
And while you get the drivers straight from the OEM websites, ADU has an inbuilt database of OEM drivers, all accumulated helping users to save time and efforts