How Do I Update Qualcomm HS-USB QDLoader 9008 Driver

Since Qualcomm powers most mobile phones, when you need to connect your phone to your PC, flash stock ROMs, or unbrick any Qualcomm device, you need a Qualcomm HS-USB QDLoader 9008 driver.

When the phone is in EDL (Emergency Download Mode), this specific driver lets you connect it to the PC. This is why, when the Qualcomm USB driver is missing, corrupt, or outdated, you face problems during file transfer from phone to PC or writing ADB commands.

Check out the complete guide to learn how to update Qualcomm USB driver Windows 10.

Note : Without installing Qualcomm USB Driver on your Windows PC, you cannot flash your Android device with Qualcomm Flash Tool, QFIL, etc.

What is EDL Mode?

Emergency Download Mode is a fastboot mode for Qualcomm-powered phones. It is used to unblock the bootloader, flash firmware, update the phone, and do many other things.

What is Qualcomm HS-USB QDLoader USB Driver?

Qualcomm HS-USB QDLoader USB Driver is a piece of software that acts as a bridge between different devices. It helps connect your Snapdragon processor-powered device to the computer.

Moreover makes flashing stock firmware and other files using ADB and Fastboot tools such as Nokia OST, Mi Flash Tool, Odin Flash Tool, LGUP tool, etc., easier. This is why your computer won’t detect your connected Android device properly when you don’t install the driver.

Must Read: How To Download and Update Qualcomm USB Driver for Windows 10

How To Download Qualcomm HS USB Qdloader 9008 Driver – Windows?

To download the Qualcomm USB driver alongside having a Qualcomm chipset device, you need to have a laptop or desktop with Windows running on it. Furthermore, you need the following things:

A Qualcomm processor Android device.
ADB drivers installed for Qualcomm HS-USB QDloader driver update and installation.
Mi PC Suite for Xiamoi device.

Qualcomm HS-USB QDloader 9008 Driver (32-bit)

Qualcomm HS-USB QDloader 9008 Driver (64-bit)

Stock Qualcomm Driver (for manual installation)

You can Google to download these files. However, make sure you download it from a trusted source. After downloading the driver, follow the instructions below to install the Qualcomm USB driver. If you don’t want to go through this hassle, there’s an easy way out. Give Advanced Driver Updater a try.

What is Advanced Driver Updater?

Developed by Systweak Software, Advanced Driver Updater is a popular driver updating software for Windows users. The utility is designed to help Windows users update outdated drivers and fix all driver-related issues. Advanced Driver Updater automatically detects outdated drivers and updates them to the latest and compatible version. Also, it keeps a backup of old drivers and allows restoring them if anything goes wrong.

Furthermore, it comes with a 60-day money-back guarantee and priority technical support.

Read the complete review

How To use Advanced Driver Updater?

Using Advanced Driver Updater is way too simple. Whether you are a beginner or an advanced user, it doesn’t matter, as, with a few clicks, anyone can update drivers using the best driver updating tool. To use it, follow these instructions:

Download and install Advanced Driver Updater.

Launch it and click Start Scan Now to perform the scan and identify outdated drivers.

Analyze scan results and update the outdated drivers. Free users must use the Update driver option next to each driver to update them individually.

At the same time, registered users can benefit from the Update All button.

Restart the PC to let changes take effect.

No worries if you don’t want to use a third-party driver updating tool. Follow these manual steps to install the Qualcomm USB driver.

Directly Installing Qualcomm HS-USB QDloader 9008 Driver – Windows

Unzip the downloaded setup file.
Extract Qualcomm HS-USB QDloader USB Driver for Windows
Select the Free BLD bullet from the installation wizard and click on the Next
Accept the terms and conditions & move ahead.
Click on the Install button, & wait for the process to start.
When done, click Finish.

Manually Installing Qualcomm HS-USB QDloader USB Driver

Assuming you have downloaded Qualcomm HS-USB QDloader USB Driver, unzip the folder.
Now install ADB drivers.
After that, make the following adjustments on your phone.
- Enable Developer Options.

To do so, go to the phone’s settings.

About device or About phone.

Scroll down and continuously tap Build number seven times.

Note : Instead of Build Number, if you see Software Information > tap on it > Build Number and then tap on it seven times.

Enter the password, PIN, or pattern.

This will enable the Developer option.

Now, open Developer Options from your device’s settings and enable USB Debugging.

Connect your smartphone to the PC using a USB Cable

Open the ADB Drivers folder (C:\platform-tools), press the shift key > right-click on the space select Open PowerShell Window Here

Execute the ADB devices command in PowerShell

Run the ADB reboot edl workaround.

Launch Device Manager. Press Windows + X > select Device Manager.

Double click Other Devices > right-click on QHUSB_BULK > Update driver.

Select the Browse option and upload the downloaded Stock Qualcomm driver zipped folder

Let the installation process finish. If you get a message that Windows can’t verify the publisher of this driver software, click on Install this driver software anyway.

This will install Qualcomm HS-USB QDloader USB Driver update.

Wrap Up

That’s all on how to download Qualcomm HS US QDLoader 9008 driver and update it on Windows. You can use the manual ways or Advanced Driver Updater to save time and get Qualcomm USB driver 64-bit downloaded and installed on your Windows. Do let us know which method works best for you in the comments section.

Preeti Seth

A UX writer who loves explaining technical details in a clear, crisp, and concise manner. She loves writing about technical troubleshooting, How-To's, product reviews, etc. In her free time, she loves reading, meditating, and traveling.