It has been three years since Windows 11 was released on 5 October 2021. Yet its market percentage compared to Windows 10 is less. Only 30% of users use Windows 11, while 65% still use Windows 10. But why so? Why do people find Windows 10 better? There are several reasons behind this, and it’s the story for another day. However, after researching, one thing that came to light is that the “This PC can’t run Windows 11” error is a prominent reason. Generally, it is considered to be a hardware-related error. Luckily, there are ways to bypass it and install Windows 11 on PCs where the “This PC doesn’t currently meet Windows 11 system requirements” message is encountered.
| 1 gigahertz (GHz) Processor or faster with 2 or more cores on a compatible 64-bit processor or System on a Chip (SoC). |
| 8 GB RAM |
| Minimum 64 GB Storage |
| UEFI, Secure Boot capable |
| Trusted Platform Module (TPM) version 2.0. |
| Compatible with DirectX 12 or later with WDDM 2.0 driver |
To check if your PC is compatible with running Windows 11, use the PC Health Check tool. You can download this free tool from Microsoft’s official page. If you receive the “This PC can’t run Windows 11” error, use the methods below one by one. If you get any error message, proceed with the Windows 11 installation after downloading the ISO file.
There are several reasons why your PC might not be able to run Windows 11:
1. Hardware Requirements: Windows 11 has specific hardware requirements, including a compatible 64-bit processor, 4 GB of RAM, and 64 GB of storage. If your PC does not meet these requirements, it won’t be eligible for the upgrade.
2. Trusted Platform Module (TPM) 2.0: Windows 11 requires TPM version 2.0, a security chip integrated into the motherboard. If your PC has an older version of TPM or lacks a TPM chip entirely, you cannot install Windows 11.
3. Secure Boot: Windows 11 requires Secure Boot to be enabled. You may encounter issues if your PC’s firmware does not support Secure Boot or is not enabled in the UEFI/BIOS settings.
4. Unsupported Processor: Some older processors are incompatible with Windows 11. Microsoft’s compatibility list includes specific CPU models; if your processor is not on that list, you may be unable to upgrade.
5. UEFI Firmware: Windows 11 requires UEFI firmware with Secure Boot capability. Legacy BIOS systems do not meet this requirement.
6. System Firmware Updates: Your system might need firmware or BIOS updates to be compatible with Windows 11. Ensure your firmware is up-to-date and compatible with the new OS.
7. Unsupported Software or Drivers: Certain older software or drivers might not be compatible with Windows 11, potentially causing issues during installation or operation.
8. Partition Scheme: Windows 11 installation requires a GPT partition scheme. If your disk uses MBR (Master Boot Record), you must convert it to GPT.
If your PC does not meet these requirements, you may need to consider upgrading your hardware or making the necessary adjustments to install Windows 11.
There are many ways to bypass this error. We have explained all the working methods. Some methods might work for a few users and might not work for others. So, it is recommended that after you complete a method, you check if Windows 11 is possible. If not, then follow the next method, and so on.
The steps below will help download the WinBootMate tool, download Windows 11 ISO for installation, and patch the Windows 11 bootable USB to install Windows 11 OS on any PC without the error “This computer can’t run Windows 11.”
Step 1: Click on this link to download WinBootMate for free. You can also visit the official website.
Step 2: Download the original Windows 11 ISO from the official link.
Note : The ISO file is 7GB, so you need an 8GB empty USB Pen Drive.
Step 3: Now, double-click on the WinBootMate installation file to install the tool on your PC and launch the utility.
Step 4: Attach the 8GB USB Pen Drive to your PC and click the Browse button on the WinBootMate app to select the Windows 11 ISO you downloaded in Step 2.
Step 5: Click the circular button to select “ Create A Bootable USB.”
Step 6: Select the USB to create the Windows 11 bootable drive.
Step 7: Check the box before the “Bypass Windows 11’s Secure Boot, TPM, and CPU” option to ensure that these checks are not made while installing Windows 11.
Step 8: Click on the Burn button at the middle center of the screen and wait for the Patched Windows 11 to burn on the USB drive.
Step 9: After the process is complete, insert the USB into any computer you wish to install Windows 11 on and reboot it. When you encountered the error, the PC must have been set to boot from USB, so there is no need to change that setting.
Note : The WinBootMate provides the user's traditional BIOS and UEFI menus. You can use any menu and follow the instructions to install Windows 11.
Step 10: Follow the onscreen instructions, and after your PC reboots, it will load into Windows 11 without you having to face the “This PC doesn’t currently meet Windows 11 system requirements” or any similar error.
If your PC has the required hardware and includes the Secure Boot feature, you need to enable this feature to install Windows 11 on it.
Here are the steps to check for the Secure Boot feature.
Step 1: Press Win + R to launch the RUN window, type “msinfo32,” and click the OK button.
Step 2: The System Information box will open. Look for Secure Boot State. If it is “On,” then you will not have any issues installing Windows 11.
Step 3: If it shows “Off,” then check BIOS Mode. For UEFI BIOS Mode, it is easy to enable Secure Boot. But for Legacy BIOS mode, you will have to switch Legacy to UEFI, which is not easy, and hence, we recommend using the WinBootMate tool.
Step 1: Press Win + I to open the Settings and click the Update & Security icon.
Step 2: Next, click the Recovery tab in the left panel, locate the Advanced Startup section, and click the Restart Now button.
Step 3: The computer will boot into the Windows 10 recovery environment. From there, select Troubleshoot > Advanced options > UEFI Firmware Settings.
Note : This option will not be available if you use a legacy BIOS. In this case, you are advised to use the first method of the WinBootMate tool.
Step 4: In the UEFI settings, navigate to the Boot or Security tab, select Secure Boot, and set it to Enabled.
Step 5: Press `F10` to save the changes and exit. Your computer will then reboot into Windows with Secure Boot enabled.
Upgrading to Windows 11 requires a Trusted Platform Module (TPM) version 2.0, a security chip embedded in the motherboard. Without this TPM chip, you may face increased security risks. If your PC lacks a compatible TPM 2.0 module, running Windows 11 may not be possible normally. Here are the steps to check if your PC supports TPM 2.0.
Step 1: Press Win + R, type “tpm.msc” and click the OK button.
Step 2: Look for Status and check what it says. It might state, “The TPM is ready for use,” which means you can install Windows 11.
If your TPM version is lower than 2.0 or if it indicates “Compatible TPM cannot be found,” you will not be able to upgrade to Windows 11. In this case, you can use the Registry Tweaks below or the WinBootMate tool, as explained in the first method.
Read Alos: How to Fix the “Trusted Platform Module Has Malfunctioned” Error in Windows
A computer with outdated or insufficient hardware might not meet the requirements for a Windows 11 upgrade. If you’re eager to experience the new system and aren’t planning to replace your device, you can attempt to bypass the Secure Boot and TPM 2.0 checks to install Windows 11 on an unsupported machine. There are a few Registry Tweaks that you can carry out. While a tweak might work on your PC, it may not work on another PC. You must try all the tweaks one by one until Windows 11 gets installed on your PC, bypassing all requirements.
Step 1: Press Win + R, type “regedit,” and click OK to open the Windows Registry.
Step 2: Copy the following path in the address bar of the Registry Editor, followed by the Enter key.
Computer\HKEY_LOCAL_MACHINE\SYSTEM\Setup
Step 3: Make a right click on the Setup folder in the left panel. Choose New > Key and rename it as “LabConfig”.
Step 4: Now, right-click on the right side, choose New > DWORD (32-bit) Value, and rename it “BypassTPMCheck.”
Step 5: Double-click the entry, change the Value data to 1, and click OK.
Step 6: Create another DWORD using the same method, and name it “BypassRAMChec.” Set its Value data to 1, then click OK.
Step 7: Create a DWORD named “ByPassSecureBootCheck” and set its Value data to 1.
Step 8: Create a DWORD named “BypassStorageCheck” and set its Value data to 1.
Step 9: Create a DWORD named “BypassCPUCheck” and set its Value data to 1.
After making these changes, you can exit and attempt to install Windows 11.
If you encounter the “This PC can’t run Windows 11” error, it usually means your computer does not meet the minimum system requirements for Windows 11. Here is another Registry tweak to fix this in case the first one does not work.
Step 1: Press Win + R, type regedit, and press Enter.
Step 2: Navigate to HKEY_LOCAL_MACHINE\SYSTEM\Setup\MoSetup.
Step 3: Right-click, select New > DWORD (32-bit) Value, and name it AllowUpgradesWithUnsupportedTPMOrCPU.
Step 4: Set its value to 1.
Read Also: Windows 11 installation Has Failed – Here’s How To Fix It
We hope that you were able to install Windows 11 on your system using the steps explained. If not, you will have to upgrade the hardware. Please write in the comments section below which method worked for you.
In addition, to keep your PC optimized and ensure smooth performance without facing slow speed issues, we suggest you use PC optimization software like Advanced System Optimizer once every 15 days. It will help identify junk files, keep drivers updated, clean infections, manage startup items, clean invalid registry entries, defragment your hard disk, and a lot more. To get it and use its trial version click the official page.
Yes, it is possible. By using WinBootMate, you can bypass the CPU restrictions and install Windows 11 on any Intel or AMD processor.
Yes, it does. The application’s interface shows that the TPM and Secure Boot bypass options are included. This allows you to install Windows 11 without needing TPM 2.0 or Secure Boot, as well as without having 8GB RAM.
As per Microsoft, the 22H2 iteration of Windows 10 will be the last iteration of…
Have you noticed the speed difference in the internet when using the ethernet connection and…
WARNING: Please back up your data and replace your hard disk drive. A failure may…
One of the most frustrating experiences in a gamer's life is when playing a game,…
Can you help with - The insufficient storage error on Fortnite is frustrating because it…
You are working on your PC, playing a game, or streaming videos, and suddenly, you…